Conoid shell
A conoid is a special kind of warped ruled surface which, as a curved shell roof, can be used as an alternative to a barrel vault. The basic principle is that one edge of the shell is curved while the opposite edge is kept straight. In architecture, this is referred to as a ‘right conoid’.
Two basic geometrical forms are encountered:
- A straight line is moved along a curved line at one end and a straight line at the other end, the resultant shape being cut to the required length.
- A straight line is moved along a curved line at one end and a different curved line at the other end.
The end consists of a reinforced concrete or steel lattice, which serves as a stiffening beam to prevent shell deformation. Support is required at all corners.
Spans of up to 12 m with chord lengths of up to 24 m are possible. The typical chord-to-span ratio is 2:1.
When conoids are made of reinforced concrete they require formwork on which to set the reinforcing steel and pour the concrete. The initial cost of making the formwork is usually high, but it can be reduced by pouring many shells on the same form.
There can be a solid infill or glazed end diaphragm. Glass panes set between adjacent conoids at the curved front of each conoid can allow for illumination. If the conoids face north they get the best natural light, which can be important for space such as factories.
Conoid shells are an ideal shape for cantilevered roofs covering the stands of stadiums with either a curvature up or a curvature down.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- Anticlastic.
- Barrel vault.
- Cantilever.
- Folded plate construction.
- Hyperbolic paraboloid.
- Long span roof.
- Megastructure.
- Pendentive dome.
- Portal frame.
- Shell roof.
- Suspended ceiling.
- Synclastic.
- Tensile structures.
- Types of ceiling.
- Types of dome.
- The history of fabric structures.
[edit] External references
- ‘Building Construction Handbook’ (6th ed.), CHUDLEY, R., GREENO, R., Butterworth-Heinemann (2007)
- ‘The story of a right wavelet conoid’ , J. Dolezal (2011)
Synclastic.
Featured articles and news
The act of preservation may sometimes be futile.
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.